14.5.1.1.3 Colliding calls
Call collisions can occur when both the SwMI and the MS simultaneously send a D/U-SETUP PDU. Two call set-ups
are colliding when a D-SETUP PDU is received within the window where the CC waits for a Call Identifier from the
SwMI after a U-SETUP PDU has been issued. If this occurs and the MS cannot support more concurrent calls, the MS
shall behave as follows:
[code]양쪽 모두 call 에 충돌이 일어나면 SwMI 그리고 MS 동시에 D/U-SETUP PDU 전송한다.
두개의 call 설정은 충돌한다. D-SETUP PDU 가 윈도우와 함께 받았을 때 SwMI로 U-SETUP PDU가 쟁점을 공표한 뒤 CC는 call 식별자를 위해서 기다린다.
이게 일어나면 그리고 MS에 더 많이 동시에 call 이 발생하면 MS는 계속해서 따라가게될 것이다.
[/code]
• if the MS wishes to keep its own call attempt then it shall respond to the incoming call with a
U-DISCONNECT PDU with a disconnect cause "called party busy"; or
[code]
만약 MS 에 계속해서 바란다면 그것은 call을 시도할 것이다. 그렇다면 U-DISCONNECT PDU와 함께 그걸은 걸려오는 call이 반응 할것이다. "called party busy" 라는 연결종료의 원인을 일으킨체
[/code]
• if the MS wishes to accept the incoming call then the CC shall accept the call as defined in clause 14.5.1.1.1.
The CC shall also send a CANCEL request primitive to the lower layers to cancel the sending of the U-SETUP
PDU.
[code]만약 MS에게 전화 오기를 승낙하기 바란다면 CC 는 승낙해야할 것이다. 14.5.1.1.1. 장에 선언되어있는 것에
또한 CC 는 CANCEL 요청 프리미티브를 lower layer에 send해야한다 U-SETUP 에 cancel 을 sending해서 [/code]
If the lower layers indicate that the PDU has already been completely sent, then the CC shall send
a U-DISCONNECT PDU for its own call set-up.
[code]만약 lower layers 를 가르킨다면 그건 PDU 가 이미 준비되었다고 전송한다는것이다. CC는 call setup을 위해서 U-DISCONNECT PDU는 send 할 것이다. [/code]
Another case of call collision may sometimes be detected and resolved by the SwMI.
[code]또 다른 call 출동 케이스는 SwMI에 의해서 가끔식 발견되거나 해결될지 모른다. [/code]
If the colliding calls are call set-up
attempts between the same user applications and the requested basic services are the same, then the SwMI may merge
the calls.
[code]만약 call이 call setup 을 하다가 충돌하게되면[/code]
The SwMI should inform both parties by a D-CONNECT PDU with an amalgamation indication that the calls
are merged together, see the call ownership element.
[code]SwMI 는 두 파티들이 D-CONNECT PDU에 의해서 합병하는 지시를 신고해야할 것이다.
그 두 call들이 동시에 머지되며 call에 소유권 요소 볼수 있다 [/code]
The CC should pass this information on to the application in the TNCC-SETUP confirm primitive.
[code]CC 는 TNCC-SETUP confirm primitive 내에 신청에 그 정보를 넘겨야할 것이다. [/code]
Call collisions can occur when both the SwMI and the MS simultaneously send a D/U-SETUP PDU. Two call set-ups
are colliding when a D-SETUP PDU is received within the window where the CC waits for a Call Identifier from the
SwMI after a U-SETUP PDU has been issued. If this occurs and the MS cannot support more concurrent calls, the MS
shall behave as follows:
[code]양쪽 모두 call 에 충돌이 일어나면 SwMI 그리고 MS 동시에 D/U-SETUP PDU 전송한다.
두개의 call 설정은 충돌한다. D-SETUP PDU 가 윈도우와 함께 받았을 때 SwMI로 U-SETUP PDU가 쟁점을 공표한 뒤 CC는 call 식별자를 위해서 기다린다.
이게 일어나면 그리고 MS에 더 많이 동시에 call 이 발생하면 MS는 계속해서 따라가게될 것이다.
[/code]
• if the MS wishes to keep its own call attempt then it shall respond to the incoming call with a
U-DISCONNECT PDU with a disconnect cause "called party busy"; or
[code]
만약 MS 에 계속해서 바란다면 그것은 call을 시도할 것이다. 그렇다면 U-DISCONNECT PDU와 함께 그걸은 걸려오는 call이 반응 할것이다. "called party busy" 라는 연결종료의 원인을 일으킨체
[/code]
• if the MS wishes to accept the incoming call then the CC shall accept the call as defined in clause 14.5.1.1.1.
The CC shall also send a CANCEL request primitive to the lower layers to cancel the sending of the U-SETUP
PDU.
[code]만약 MS에게 전화 오기를 승낙하기 바란다면 CC 는 승낙해야할 것이다. 14.5.1.1.1. 장에 선언되어있는 것에
또한 CC 는 CANCEL 요청 프리미티브를 lower layer에 send해야한다 U-SETUP 에 cancel 을 sending해서 [/code]
If the lower layers indicate that the PDU has already been completely sent, then the CC shall send
a U-DISCONNECT PDU for its own call set-up.
[code]만약 lower layers 를 가르킨다면 그건 PDU 가 이미 준비되었다고 전송한다는것이다. CC는 call setup을 위해서 U-DISCONNECT PDU는 send 할 것이다. [/code]
Another case of call collision may sometimes be detected and resolved by the SwMI.
[code]또 다른 call 출동 케이스는 SwMI에 의해서 가끔식 발견되거나 해결될지 모른다. [/code]
If the colliding calls are call set-up
attempts between the same user applications and the requested basic services are the same, then the SwMI may merge
the calls.
[code]만약 call이 call setup 을 하다가 충돌하게되면[/code]
The SwMI should inform both parties by a D-CONNECT PDU with an amalgamation indication that the calls
are merged together, see the call ownership element.
[code]SwMI 는 두 파티들이 D-CONNECT PDU에 의해서 합병하는 지시를 신고해야할 것이다.
그 두 call들이 동시에 머지되며 call에 소유권 요소 볼수 있다 [/code]
The CC should pass this information on to the application in the TNCC-SETUP confirm primitive.
[code]CC 는 TNCC-SETUP confirm primitive 내에 신청에 그 정보를 넘겨야할 것이다. [/code]
'Protocol > TETRA' 카테고리의 다른 글
| Figure 14.11 individual call setup phase - called user application reject call (0) | 2013.09.25 |
|---|---|
| 14.5.1.1.4 Unsuccessful call set-up (0) | 2013.09.25 |
| 부가 서비스(Supplementary services control) (0) | 2013.09.25 |
| 베어러 기능(bearer capability) 정보 요소 (0) | 2013.09.25 |
| message type (0) | 2013.09.25 |