14.5.2.4 U-Plane switching
[code][/code]
The U-Plane switching procedure ensures that traffic/signalling synchronization between the CMCE and the MAC shall be maintained during the lifetime of a call. The CC informs the MAC when it has permission to transmit traffic (i.e. TCH or STCH) and when to stop.
[code]
U-Plane 스위칭 절차를 확실히 한다 그것은 트래픽/시그널링 신호를 CMCE 에서 MAC 간에 콜이 진행하는 동안을 유지하며 맞춘다.
[/code]
The CC also informs the MAC when it may process received traffic (and when to stop).
[code]
CC 또한 MAC 이 트레픽 작업을 얻었을지도 모를대 알린다.
[/code]
The latter procedure also assists the MAC to interpret when the received bit-stream on the assigned channel is TCH/STCH and when it is SCH.
[code]
다음 절차 또한 지원한다 할당된 채널 이 TCH/STCH 그리고 SCH 일 때 비트 스트림을 받으면은 맥에서 해석한다.
[/code]
The CC changes the U-plane operation in the MAC by issuing the CONFIGURE request primitive, indicating "Switch U-plane = On" or "Switch U-plane = Off", "Tx grant = true" or "Tx grant = false" and "Simplex/duplex = simplex".
[code]
CC 는 CONFIGURE request primitive 가 이야기 하는 것에 의해서 U-Plane 명령을 변경한다.
지시하는것은 "switching u-plane = on" 혹은 "switch u-plane=off", "tx grant=true" or "tx grant=false" and "simplex/duplex = simplex" 이다.
[/code]
There shall be only three valid combinations.
[code]
그 것은 오직 세개의 유요한 결합 이어야한다.
[/code]
1) Switch U-plane = On, Tx grant = true, Simplex/duplex = simplex:
- MS is authorized to transmit traffic.
[code]
U-plane = on , tx grant = true, simple/duplex = simple
[/code]
2) Switch U-plane = On, Tx grant = false, Simplex/duplex = simplex:
- MS is authorized to receive traffic.
[code]
[/code]
3) Switch U-plane = Off:
- withdraws previous authorization to transmit and/or receive traffic.
[code][/code]
14.5.2.4.1 End of call set-up phase
When the CC in a MO call receives a D-CONNECT PDU or when the CC in a MT call receives a D-SETUP PDU, it shall issue a CONFIGURE request primitive to the lower layers containing information about the call e.g. the type of traffic, the interleaving depth, the call identifier and whether the call is end-to-end encrypted.
[code]
MO 콜을 받을 때 D-CONNECT PDU 나 CC 내에 MT 콜이 D-SETUP PDU를 받을 때,
그때 CONFIGURE request primitive 에서 하위 레이어로 call 정보에 관한것을 실어 이야기할 것이다.
그 트레픽의 형식은 깊게 끼워넣을 것이다, 콜 식별자 그리고 end-to-end 암호화 콜
[/code]
If the transmission grant element in the D-CONNECT PDU is set to "transmission granted" then the CONFIGURE request primitive shall contain the parameter value "Switch U-Plane = On" and "Tx grant = true" to indicate that the MAC has permission to transmit traffic. If the transmission grant element is set to "transmission granted to another user" then the CONFIGURE request primitive shall contain the parameter value "Switch U-Plane = On" but shall contain "Tx grant = false" to indicate that the MAC should receive traffic. For the other values of the transmission grant element, the U-plane shall not be switched on.
[code]
만약 D-CONNECT PDU 내에 전송 승인 요소가 "transmission granted" 로 설정되어 있다면은 그렇다면은 CONFIGURE request primitive 는 파라메터 값을 "switch u-plane = on" 그리고 "tx grant = true" 에서 지시한다. 그 맥 은 전송 트래픽으로 허가를 얻을 것이다 만약
전송 허가 요소 가 "transmission granted to another user" 로 설정되어 있다면 그렇다면 CONFIGURE request primitive 는 다음에 파라메터 값이 실려 있을 것이다. "Switch u-plane = on" 하지만 "tx grant = false' 가 지시되어 실려 있다면은 그것은 맥이 트래픽을 받아야할 것이다.
전송 허가 요소의 다른 값을 위해서 u-plane 는 스위칭 on 하지 않는다.
[/code]
If the transmission grant element in the D-SETUP PDU is set to "transmission granted to another user" then the CONFIGURE request primitive shall contain the parameter value "Switch U-Plane = On" but shall contain "Tx grant = false" to indicate that the MAC should receive traffic. For the other values of the transmission grant element, the U-plane shall not be switched on.
[code]
만약 D-SETUP PDU 내에 전송 허가 요소가 "transmission granted to another user" 로 설정되어 있다면은 그렇다면 CONFIGURE request primitive 는 "swich u-plane=on" 이 실려 있어야할 것이다. 하지만 "tx grante=false" 로 지시한다면은 맥은 트래픽을 받아야할 것이다. 전송 허가 요소의 다른 값을 위해서 u-plane 는 스위칭 하지 않을것이다.
[/code]
The only valid values of the transmission grant element in a group-addressed PDU shall be "transmission granted to another user" and "transmission not granted".
[code]
그룹 주소 PDU 내에 전송 허가 요소의 오직 유효한 값만이 "transmission granted to another user" 일것이다. 그리고 "transmission not granted"
[/code]
14.5.2.4.2 During call maintenance phase
a) Transmission grant control
When the CC does not have permission to transmit, and if it receives a D-TX GRANTED PDU with the transmission grant element set to "transmission granted" or "transmission granted to another user", then the CC shall send a CONFIGURE request primitive containing the parameter "Switch U-Plane = On" and indicating whether the MAC has permission to transmit traffic ("Tx grant = true" or "Tx grant = false" respectively). For the other values of the transmission grant element, the U-plane state shall not be changed.
[code]
CC는 전송을 위해 허가를 얻지 못했을 것이다, 그리고 전송 허가 요소가 "transmission granted" 혹은 "transmission granted to another user" 로 설정되어 있는 D-TX GRANTED PDU 받는다면, 그렇다면ㅇ CC는 CONFIGURE request primitive 를 전송할 것이다. "switch u-plane =on" 를 실어서
그리고 지시한다 맥 전송 트래픽 허가를
전송 허가요소의 다른 값을 위해서 u-plane 상태를 변화하지 않는다.
[/code]
While the CC has permission to transmit, it shall ignore group addressed D-TX GRANTED PDUs (see clause 14.5.2.2.1 b)).
[code]
cc 가 퍼미션을 전송하는 동안, 그때 그룹 주소 D-TX GRANTED PDU 는 무시한다.
[/code]
b) Transmission ceased
When the CC receives a D-TX CEASED PDU or on receipt of a REPORT indication primitive of either successful or unsuccessful transmission of a U-TX CEASED PDU, the CC shall issue a CONFIGURE request primitive containing the parameter value "Switch U-Plane = Off".
[code]
전송 중단
CC 가 D-TX CEASED PDU 또는 U-TX CREASED PDU 의 성공한 또는 성공하지 못한 전송의 REPORT indication primitivie receipt 를 받을 것이다.
[/code]
c) Temporary pause.
When the CC receives a D-TX WAIT PDU, and if the U-plane is currently switched on for either transmission or reception, the CC shall issue a CONFIGURE request primitive containing the parameter value "Switch U-plane = Off".
[code]
CC 는 받을 것이다. D-TX WAIT PDU를, 그리고 만약 U-plane 이 현제 스위칭되었다면 전송 이나 reception을 위해서, CC 는 CONFIGURE request primitivie 는 "Switch u-plane off" 값을 담아 이야기 할 것이다.
[/code]
When the CC receives a D-TX CONTINUE PDU then:
[code][/code]
• if the continue element is set to "continue" and the MS had permission to transmit traffic at the time of receipt of the D-TX WAIT PDU, then the CC shall issue a CONFIGURE request primitive containing the parameter values "Switch U-Plane = On" and "Tx grant = true";
[code]
만약 진행 요소가 "continue" 로 설정되어 있거나 MS 가 D-TX WAIT PDU 의 receipt 의 time 에 전송 트래픽으로 퍼미션을 얻는다면 그렇다면
CC 는 CONFIGURE request primitive 는 'swithc u-plane = on' 그리고 'tx grant=true' 을 담아 이야기할 것이다.
[/code]
• if the continue element is set to "continue" and the MS did not have permission to transmit traffic at the time of receipt of the D-TX WAIT PDU, then the CC shall issue a CONFIGURE request primitive containing the parameter value "Switch U-Plane = On" but containing "Tx grant = false".
[code]
만약 진행 요소가 "continue" 를 설정하고 있고 그리고 MS 가 D-TX WAIT PDU 의 receipt의 시간에 전송 트레픽으로 허가를 얻지 못했었다면
그렇다면 CC는 CONFIGURE request primitive 는 "switch u-plane on" 을 담사 이야기 해야할 것이다. 하지만 실려있는게 "TX grante=false"
[/code]
If the Continue element is set to "not continue" then the U-plane shall not be switched on.
[code]
만약 진행 요소 가 "not continure" 로 설정되 있으면 u-plane 는 스위칭하지 않을 것이다.
[/code]
d) Interruption
When the CC receives a D-TX INTERRUPT PDU, and if the transmission grant element is set to "transmission granted to another user", then the CC shall issue a CONFIGURE request primitive containing the parameter value "Switch U-Plane = On" but containing "Tx grant = false" to indicate that the MAC should receive traffic.
[code]
CC 는 D-TX INTERRUPT PDU를 받을 것이다. 그리고 전송 허가 요소는 "transmission granted to another user"로 설정되어있다. 그렇다면
CC 는 CONFIGURE request primitive에 "switch u-plane =on" 을 담아 이야기할 것이다. "switch u-plane = on" 하지만 'tx-grante =false"가 실려 지시하고 있을 것이다 맥은 트레픽을 받는다.
[/code]
For the other values of the transmission grant element, the CC shall issue a CONFIGURE request primitive containing the parameter value
"Switch U-Plane = Off".
[code]
전송 허가 요소의 다른 값을 위해서 CC는 CONFIGURE request primitive 에 "switch u-plane = off" 를 담아이야기할 것이다.
[/code]
While the CC has permission to transmit, it shall ignore group addressed D-TX INTERRUPT PDUs.
[code]
CC 는 허가를 전송하기 위해서 그것은 그룹 주소 D-TX INTERRUPT PDU를 무시한다.
[/code]
e) Call restoration
When CC receives a BREAK indication primitive indicating that a temporary break in the radio link has occurred, the CC shall issue a CONFIGURE request primitive containing the parameter value "Switch U-Plane = Off".
[code]
콜 복구
CC 가 BREAK indication primitive 받을아 지시할 때 그것은 레디오 링내 내에서 잠시 정지할 것이다.
CC는 CONFIGURE request primitive 를 이야기 한다 "switch u-plane = off" 를 담아서
[/code]
When CC receives a D-CALL RESTORE PDU indicating that the call has now been restored after a temporary break in the radio link, and if the transmission grant element is set to "transmission granted" or "transmission granted to another user", then the CC shall issue a CONFIGURE request primitive containing the parameter value "Switch U-Plane = On" and indicating whether the MS has permission to transmit traffic ("Tx grant = true" or "Tx grant = false" respectively).
[code]
CC는 D-CALL RESTORE PDU를 받을 것이다. 지시하는 그 call 이 복구한다 레디오 링크 내에 임시 정지한 후에, 그리고 전송 허가 요소는 "tranmission granted" 나 "tranmission granted to another user" 로 설정된다,
그렇다면 CC 는 이야기할 것이다. CONFIGURE request primitive를 "switch u-plane= on" 담아서 이야기할다 그리고 지시한다 MS가 전송 트레픽 허가를
[/code]
For the other values of the transmission grant element, the U-plane shall not be switched on.
[code]
전송 허가 요소의 다른 값을 위해서 U-PLANE 는 스위칭 ON 하지 않는다.
[/code]
14.5.2.4.3 Call disconnection phase
When the CC receives a D-RELEASE PDU, or if it receives a REPORT indication primitive of either successful or unsuccessful transmission of a U-DISCONNECT PDU, or if it receives a TNCC-RELEASE request primitive from the user application indicating that the user wishes to leave the call (without disconnecting the call), then the CC shall issue a CONFIGURE request primitive to the lower layers containing the parameter value "Switch U-Plane = Off".
[code]
CC 가 D-RELEASE PDU 를 받거나 U-DISCONNECT PDU 의 성공한 또는 성공하지 않은 전송을 의 REPORT indication primitive를 받을 때
받는다.
사용자 요청에 TNCC-RELEASE request primitive 는 지시한다 그것은 사용자가 원해서 콜을 정지할 때이며, 그렇다면 CC는 CONFIGURE request prmitive를 하위 레이어로 "swtich u-plane off 를 담아 이야기한다.
[/code]
[code][/code]
The U-Plane switching procedure ensures that traffic/signalling synchronization between the CMCE and the MAC shall be maintained during the lifetime of a call. The CC informs the MAC when it has permission to transmit traffic (i.e. TCH or STCH) and when to stop.
[code]
U-Plane 스위칭 절차를 확실히 한다 그것은 트래픽/시그널링 신호를 CMCE 에서 MAC 간에 콜이 진행하는 동안을 유지하며 맞춘다.
[/code]
The CC also informs the MAC when it may process received traffic (and when to stop).
[code]
CC 또한 MAC 이 트레픽 작업을 얻었을지도 모를대 알린다.
[/code]
The latter procedure also assists the MAC to interpret when the received bit-stream on the assigned channel is TCH/STCH and when it is SCH.
[code]
다음 절차 또한 지원한다 할당된 채널 이 TCH/STCH 그리고 SCH 일 때 비트 스트림을 받으면은 맥에서 해석한다.
[/code]
The CC changes the U-plane operation in the MAC by issuing the CONFIGURE request primitive, indicating "Switch U-plane = On" or "Switch U-plane = Off", "Tx grant = true" or "Tx grant = false" and "Simplex/duplex = simplex".
[code]
CC 는 CONFIGURE request primitive 가 이야기 하는 것에 의해서 U-Plane 명령을 변경한다.
지시하는것은 "switching u-plane = on" 혹은 "switch u-plane=off", "tx grant=true" or "tx grant=false" and "simplex/duplex = simplex" 이다.
[/code]
There shall be only three valid combinations.
[code]
그 것은 오직 세개의 유요한 결합 이어야한다.
[/code]
1) Switch U-plane = On, Tx grant = true, Simplex/duplex = simplex:
- MS is authorized to transmit traffic.
[code]
U-plane = on , tx grant = true, simple/duplex = simple
[/code]
2) Switch U-plane = On, Tx grant = false, Simplex/duplex = simplex:
- MS is authorized to receive traffic.
[code]
[/code]
3) Switch U-plane = Off:
- withdraws previous authorization to transmit and/or receive traffic.
[code][/code]
14.5.2.4.1 End of call set-up phase
When the CC in a MO call receives a D-CONNECT PDU or when the CC in a MT call receives a D-SETUP PDU, it shall issue a CONFIGURE request primitive to the lower layers containing information about the call e.g. the type of traffic, the interleaving depth, the call identifier and whether the call is end-to-end encrypted.
[code]
MO 콜을 받을 때 D-CONNECT PDU 나 CC 내에 MT 콜이 D-SETUP PDU를 받을 때,
그때 CONFIGURE request primitive 에서 하위 레이어로 call 정보에 관한것을 실어 이야기할 것이다.
그 트레픽의 형식은 깊게 끼워넣을 것이다, 콜 식별자 그리고 end-to-end 암호화 콜
[/code]
If the transmission grant element in the D-CONNECT PDU is set to "transmission granted" then the CONFIGURE request primitive shall contain the parameter value "Switch U-Plane = On" and "Tx grant = true" to indicate that the MAC has permission to transmit traffic. If the transmission grant element is set to "transmission granted to another user" then the CONFIGURE request primitive shall contain the parameter value "Switch U-Plane = On" but shall contain "Tx grant = false" to indicate that the MAC should receive traffic. For the other values of the transmission grant element, the U-plane shall not be switched on.
[code]
만약 D-CONNECT PDU 내에 전송 승인 요소가 "transmission granted" 로 설정되어 있다면은 그렇다면은 CONFIGURE request primitive 는 파라메터 값을 "switch u-plane = on" 그리고 "tx grant = true" 에서 지시한다. 그 맥 은 전송 트래픽으로 허가를 얻을 것이다 만약
전송 허가 요소 가 "transmission granted to another user" 로 설정되어 있다면 그렇다면 CONFIGURE request primitive 는 다음에 파라메터 값이 실려 있을 것이다. "Switch u-plane = on" 하지만 "tx grant = false' 가 지시되어 실려 있다면은 그것은 맥이 트래픽을 받아야할 것이다.
전송 허가 요소의 다른 값을 위해서 u-plane 는 스위칭 on 하지 않는다.
[/code]
If the transmission grant element in the D-SETUP PDU is set to "transmission granted to another user" then the CONFIGURE request primitive shall contain the parameter value "Switch U-Plane = On" but shall contain "Tx grant = false" to indicate that the MAC should receive traffic. For the other values of the transmission grant element, the U-plane shall not be switched on.
[code]
만약 D-SETUP PDU 내에 전송 허가 요소가 "transmission granted to another user" 로 설정되어 있다면은 그렇다면 CONFIGURE request primitive 는 "swich u-plane=on" 이 실려 있어야할 것이다. 하지만 "tx grante=false" 로 지시한다면은 맥은 트래픽을 받아야할 것이다. 전송 허가 요소의 다른 값을 위해서 u-plane 는 스위칭 하지 않을것이다.
[/code]
The only valid values of the transmission grant element in a group-addressed PDU shall be "transmission granted to another user" and "transmission not granted".
[code]
그룹 주소 PDU 내에 전송 허가 요소의 오직 유효한 값만이 "transmission granted to another user" 일것이다. 그리고 "transmission not granted"
[/code]
14.5.2.4.2 During call maintenance phase
a) Transmission grant control
When the CC does not have permission to transmit, and if it receives a D-TX GRANTED PDU with the transmission grant element set to "transmission granted" or "transmission granted to another user", then the CC shall send a CONFIGURE request primitive containing the parameter "Switch U-Plane = On" and indicating whether the MAC has permission to transmit traffic ("Tx grant = true" or "Tx grant = false" respectively). For the other values of the transmission grant element, the U-plane state shall not be changed.
[code]
CC는 전송을 위해 허가를 얻지 못했을 것이다, 그리고 전송 허가 요소가 "transmission granted" 혹은 "transmission granted to another user" 로 설정되어 있는 D-TX GRANTED PDU 받는다면, 그렇다면ㅇ CC는 CONFIGURE request primitive 를 전송할 것이다. "switch u-plane =on" 를 실어서
그리고 지시한다 맥 전송 트래픽 허가를
전송 허가요소의 다른 값을 위해서 u-plane 상태를 변화하지 않는다.
[/code]
While the CC has permission to transmit, it shall ignore group addressed D-TX GRANTED PDUs (see clause 14.5.2.2.1 b)).
[code]
cc 가 퍼미션을 전송하는 동안, 그때 그룹 주소 D-TX GRANTED PDU 는 무시한다.
[/code]
b) Transmission ceased
When the CC receives a D-TX CEASED PDU or on receipt of a REPORT indication primitive of either successful or unsuccessful transmission of a U-TX CEASED PDU, the CC shall issue a CONFIGURE request primitive containing the parameter value "Switch U-Plane = Off".
[code]
전송 중단
CC 가 D-TX CEASED PDU 또는 U-TX CREASED PDU 의 성공한 또는 성공하지 못한 전송의 REPORT indication primitivie receipt 를 받을 것이다.
[/code]
c) Temporary pause.
When the CC receives a D-TX WAIT PDU, and if the U-plane is currently switched on for either transmission or reception, the CC shall issue a CONFIGURE request primitive containing the parameter value "Switch U-plane = Off".
[code]
CC 는 받을 것이다. D-TX WAIT PDU를, 그리고 만약 U-plane 이 현제 스위칭되었다면 전송 이나 reception을 위해서, CC 는 CONFIGURE request primitivie 는 "Switch u-plane off" 값을 담아 이야기 할 것이다.
[/code]
When the CC receives a D-TX CONTINUE PDU then:
[code][/code]
• if the continue element is set to "continue" and the MS had permission to transmit traffic at the time of receipt of the D-TX WAIT PDU, then the CC shall issue a CONFIGURE request primitive containing the parameter values "Switch U-Plane = On" and "Tx grant = true";
[code]
만약 진행 요소가 "continue" 로 설정되어 있거나 MS 가 D-TX WAIT PDU 의 receipt 의 time 에 전송 트래픽으로 퍼미션을 얻는다면 그렇다면
CC 는 CONFIGURE request primitive 는 'swithc u-plane = on' 그리고 'tx grant=true' 을 담아 이야기할 것이다.
[/code]
• if the continue element is set to "continue" and the MS did not have permission to transmit traffic at the time of receipt of the D-TX WAIT PDU, then the CC shall issue a CONFIGURE request primitive containing the parameter value "Switch U-Plane = On" but containing "Tx grant = false".
[code]
만약 진행 요소가 "continue" 를 설정하고 있고 그리고 MS 가 D-TX WAIT PDU 의 receipt의 시간에 전송 트레픽으로 허가를 얻지 못했었다면
그렇다면 CC는 CONFIGURE request primitive 는 "switch u-plane on" 을 담사 이야기 해야할 것이다. 하지만 실려있는게 "TX grante=false"
[/code]
If the Continue element is set to "not continue" then the U-plane shall not be switched on.
[code]
만약 진행 요소 가 "not continure" 로 설정되 있으면 u-plane 는 스위칭하지 않을 것이다.
[/code]
d) Interruption
When the CC receives a D-TX INTERRUPT PDU, and if the transmission grant element is set to "transmission granted to another user", then the CC shall issue a CONFIGURE request primitive containing the parameter value "Switch U-Plane = On" but containing "Tx grant = false" to indicate that the MAC should receive traffic.
[code]
CC 는 D-TX INTERRUPT PDU를 받을 것이다. 그리고 전송 허가 요소는 "transmission granted to another user"로 설정되어있다. 그렇다면
CC 는 CONFIGURE request primitive에 "switch u-plane =on" 을 담아 이야기할 것이다. "switch u-plane = on" 하지만 'tx-grante =false"가 실려 지시하고 있을 것이다 맥은 트레픽을 받는다.
[/code]
For the other values of the transmission grant element, the CC shall issue a CONFIGURE request primitive containing the parameter value
"Switch U-Plane = Off".
[code]
전송 허가 요소의 다른 값을 위해서 CC는 CONFIGURE request primitive 에 "switch u-plane = off" 를 담아이야기할 것이다.
[/code]
While the CC has permission to transmit, it shall ignore group addressed D-TX INTERRUPT PDUs.
[code]
CC 는 허가를 전송하기 위해서 그것은 그룹 주소 D-TX INTERRUPT PDU를 무시한다.
[/code]
e) Call restoration
When CC receives a BREAK indication primitive indicating that a temporary break in the radio link has occurred, the CC shall issue a CONFIGURE request primitive containing the parameter value "Switch U-Plane = Off".
[code]
콜 복구
CC 가 BREAK indication primitive 받을아 지시할 때 그것은 레디오 링내 내에서 잠시 정지할 것이다.
CC는 CONFIGURE request primitive 를 이야기 한다 "switch u-plane = off" 를 담아서
[/code]
When CC receives a D-CALL RESTORE PDU indicating that the call has now been restored after a temporary break in the radio link, and if the transmission grant element is set to "transmission granted" or "transmission granted to another user", then the CC shall issue a CONFIGURE request primitive containing the parameter value "Switch U-Plane = On" and indicating whether the MS has permission to transmit traffic ("Tx grant = true" or "Tx grant = false" respectively).
[code]
CC는 D-CALL RESTORE PDU를 받을 것이다. 지시하는 그 call 이 복구한다 레디오 링크 내에 임시 정지한 후에, 그리고 전송 허가 요소는 "tranmission granted" 나 "tranmission granted to another user" 로 설정된다,
그렇다면 CC 는 이야기할 것이다. CONFIGURE request primitive를 "switch u-plane= on" 담아서 이야기할다 그리고 지시한다 MS가 전송 트레픽 허가를
[/code]
For the other values of the transmission grant element, the U-plane shall not be switched on.
[code]
전송 허가 요소의 다른 값을 위해서 U-PLANE 는 스위칭 ON 하지 않는다.
[/code]
14.5.2.4.3 Call disconnection phase
When the CC receives a D-RELEASE PDU, or if it receives a REPORT indication primitive of either successful or unsuccessful transmission of a U-DISCONNECT PDU, or if it receives a TNCC-RELEASE request primitive from the user application indicating that the user wishes to leave the call (without disconnecting the call), then the CC shall issue a CONFIGURE request primitive to the lower layers containing the parameter value "Switch U-Plane = Off".
[code]
CC 가 D-RELEASE PDU 를 받거나 U-DISCONNECT PDU 의 성공한 또는 성공하지 않은 전송을 의 REPORT indication primitive를 받을 때
받는다.
사용자 요청에 TNCC-RELEASE request primitive 는 지시한다 그것은 사용자가 원해서 콜을 정지할 때이며, 그렇다면 CC는 CONFIGURE request prmitive를 하위 레이어로 "swtich u-plane off 를 담아 이야기한다.
[/code]
'Protocol > TETRA' 카테고리의 다른 글
| 14.5.2.7 Call ownership (0) | 2013.09.25 |
|---|---|
| 14.5.2.6 Acknowledged group call procedures (0) | 2013.09.25 |
| 14.5.2.3 Call disconnection procedures (0) | 2013.09.25 |
| 14.5.2 Group CC procedures (0) | 2013.09.25 |
| 14.5.1.3 Call disconnection procedures (0) | 2013.09.25 |